===================
Electrohome G07-FBO
===================

---------
Neckboard
---------

C107 - 10uf 250v

------------
Main Chassis
------------

C301 - 3.3uf 50v (Bipolar)
C302 - 220uf 16v
C403 - 220uf 16v
C407 - 4.7uf 63v
C408 - 4.7uf 50v
C411 - 100uf 160v
C412 - 3.3uf 160v or 200v
C504 - 1uf 50v
C506 - 33uf 16v
C511 - 47uf 160v
C517 - 47uf 16v
C518 - 220uf 16v
C520 - 3.3uf 50v (Bipolar)
C521 - 2200uf 25v
C523 - 1uf 160v
C701 - 100uf 16v
C904 - 600uf 200v (Filter cap)
C905 - 10uf 250v

NOTE:  The polarity of C302 is marked incorrectly on the bottom of the chassis.

--------------
Common failure
--------------

R908 - 47K-ohm 1/2-watt


Some G07 models were sent from the factory with incorrect resistors in the sync circuit.  Those values should be:

R314 - 390-ohm 1/4-watt
R317 - 390-ohm 1/4-Watt

----------------------------
Horizontal Curl Modification
----------------------------

Remove C501.  Remove the cap at C303 and install it at location C501.  Install a new 10uf 50v electrolytic cap at location C301 with the positive lead in the hole closest to the edge of the chassis.

Compiled by Edward Lutz
Provided by www.juniorsrevenge.com